S5070 SINGLE LINE COMMUNICATOR
This modular dialer is designed to plug into the S5832 local control panel, enabling the panel to send
and receive digital messages via a single telephone line. Upgrading a local panel with a digital
communicator enables the panel to be remotely programmed, to communicate with a central station,
or to transmit digital data to a numeric pager or personal phone line.
S5070-2 DUAL LINE COMMUNICATOR
This modular dialer supports two telephone lines. Like the single line dialer, it also plugs into the
S5832 local control panel. The dual line digital communicator is designed for use in installations
where a back-up phone is desired.
COMMANDER II REMOTE PROGRAMMING SOFTWARE
• Remote or on-site programming of control • Microsoft
®
Windows™ environment
panels. • (Windows 3.1 or higher).
• Central Station, proprietary and remote station • Alarm forwarding by fax or modem.
monitoring. • Network database sharing.
• PC-based program. • Remotely control system functions of control
• Easy-to-use graphical user interface (GUI). • panels.
• Remote diagnostics.
SN915 BUS RECEIVER
The SN915 Bus receiver connects to the keypad bus and allows all SpreadNet
®
900 MHz spread
spectrum wireless devices to operate with the Sierra control panel.
Features
• Intelligent wireless receiver.
• Easily connects on system data bus.
• Communicates wireless transmitter information over the system data bus.
• Mounts at the panel enclosure or remotely up to 111 m.
Specifications
Voltage : 210 mA @ 9.5 ~ 14.5 Vdc
Transmission frequency : 902 ~ 928 MHz Spread Spectrum
RFI immunity : 30 V/m out of band 10 MHz ~ 1000 MHz
ESD immunity : ± 12 kV
Operating temperature : 0° ~ 60°C; relative humidity up to 95% non-condensing
Housing : mist white, ABS plastic
Dimensions : 110 x 200 x 45 mm (HxWxD)
SN961 KEY FOB
This SpreadNet device fits in the palm of your hand and can serve as a keychain. It is used primarily
for remote setting and unsetting of a Sierra system, and can also send panic signals to the control
panel. Up to 60* key fobs may be used with one Sierra system.
* The total of all remotes and key fobs used with the systems may not exceed 60 devices.
Features
• 10 mW Transmitter
• Keychain style for set / unset
• Two-button panic for emergencies.
• Sierra system supports up to 60 key fobs or remotes, and reports user number.
Specifications
Power requirements : one 6 Vdc 1/2AA lithium battery
Transmission power : 10 mW maximum, transmitting period of 7.6 mSec.
Operating frequency : 902 ~ 928 MHz Spread Spectrum
Operating temperature : 0° ~ 60°C; relative humidity up to 95% non-condensing
Dimensions : 84 x 52.5 x 19 mm (HxWxD)
INSTALLER FEATURES
■ Two Programming Modes
Installers can choose menu-driven or quick mode programming. The menu-driven mode guides the
installer through programming with sequential text prompts, questions and options. Menu
programming is done with the Alphanumeric keypad. The quick programming mode allows the
installer to quickly go to a command location and verify or change programmed data. Quick mode
programming can be done with either the Alphanumeric or the LED keypad.
■ PC Programming
Programming can be done quickly and efficiently using C & K’s Commander II V3.5 Windows based
software. Several connection options are available allowing direct connect, optional panel dial back,
first call connect and answering machine bypass.
■ Easily Add System Accessories
System keypads, relay/event memory modules, zone expansion modules and SpreadNet wireless
receivers are easily added along a single data bus, making installation fast and clean.
■ Hardwire/Wireless Options
The Sierra S5832 can be installed using either conventional hardwire, SpreadNet wireless, or a
combination of the two.
(11 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales